Sometimes in very rare cases, using Master Drive Mode is still not working correctly you should try other Mode.Ĥ) Follow the instruction for your CB-ISATAU2 or CB-ISA225-U3 for connecting the power supply ONLY to the drive. Make sure the hard drive is set into MASTER Drive Mode only. Check the instruction on the label of the drive, it should show the jumper setting for a different setup like Master, Slave, CS (Cable Select) setting. ![]() It prevents the ac adapter from functioning and providing power to the drive to spin up.ģ) For a 3.5” IDE drive, there are jumpers in the drive that may need to change for it to work correctly with this adapter. ![]() This is caused by a circuit loop between the drive with the USB adapter and it will short out the ac adapter. On rare conditions using CB-ISATAU2 or CB-ISA225-U3 adapter, the 3.5" IDE will not spin up when connected to power and the USB adapter.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |